Using Three Biocide In Oil And Gas Strategies Like The Pros

Which are the ways of sterilizing biocides?
As we all know, biocides is a widely used sewage treatment agent, which has a large demand in the current market, and is also known by consumers with its secure performance and no pollution. However, you understand What are the methods of sterilizing biocides? We can open the medicinal hot water before putting in the biocides. Pay attention to the water temperature, normally approximately 60 degrees, not more than 70 degrees, otherwise it will affect the activity of this biocides, then filter may be used, if It's delivered, it can be added at one time, or it can be added once a shift, and it can be placed at a fixed point; Use the treated funnel to put it: This approach is relatively straightforward and relatively simple. We can put the appropriate Number of bactericidal algicide to the funnel and directly put the medicine into the boiler at a certain rate; If there's a water tank with algaecide from the boiler, there's absolutely no economizer. In this manner, THPS biocide we could directly put the medicine to the water tank, along with the medicine can be directly delivered to the furnace with the water distribution system to achieve the effect of sterilization and algae elimination; 4. Standard shipping, the sewage release speed of this method is about 7%, but to ensure that there is 1 release per change, the period is controlled at roughly 50s. Note that if there's absolutely no water level change following the sewage treatment, it's important to check if the furnace is obstructed. .
Evaluation of the main functional consequences of biocides
With the development of society, people's living standards have undergone major changes. The ecological environment on which we live has also experienced earth-shaking alterations. The dirt was destroyed and the water quality has become complicated. In the creation of sector and research, a large number of chemical agents have been employed, making the a variety of chemical components in the water surplus, creating a good atmosphere for the growth of algae and fungi in the water, which impacts its further improvement. Therefore, how can we solve these algae and fungi?
At this time, it's our turn to utilize our biocides. The biocides is a non-oxidizing bactericide. The look is colorless or light yellow liquid liquid. Why can it be bactericidal and algae-killing? That is because the biocides itself contains active chlorine, monoatomic oxy-hydroxyl groups and some polymers, which may effectively curb the formation of this expanding environment and remove the nutrients required for parasites and algae growth. Ingredients to achieve the results of sterilization and algae elimination.
In the manufacturing process, other sterilizing agents are periodically used in combination with other water treatment agents to control the normal operation of the circulating water system from the water treatment system. Because the bactericidal treatment agent is a compound, we should take protective steps when using it. After use, it should be sealed in a skillet and set in a cool, ventilated and dry area inside.
Our company is a producer of bactericidal therapy representatives, with research team, good product quality and high credibility. If you would like a deep understanding of our products, you can consult the official website.